Water filter filtex ft 501

Features of the water filter jug

The filter element of the FT-501 water filter jug ​​is designed with multi-stage filtration. in one filling to obtain drinking water
The filter element consists of an activated carbon filter, a special woven filament. and a special water filter sieve Helps trap sludge, suspended solids, as well as remove odor, color, chlorine and trihalomethane compounds. very well
Filtration life depends on water quality in each area. to ensure quality water It is recommended to change the filter every 2-3 months.

Procedure for using a water filter jug

Please follow the steps below to get the most out of the water filter jug.

    Open the package lid, remove the filter from the jug.
    Remove the plastic covering the filter before placing the filter in water. By allowing the entire filter to be submerged in water for 10-15 minutes to clean the filter.
    Clean the jug with clean water. (Do not use dishwashing liquid to clean this product)
    Put the filter in the original jug and press it to lock.

**In order to change or use a new filling every time Open the lid of the jug and pour the tap water. Then discard the first 2-3 pitchers of filtered water.
to clean the filter because it may contain carbon powder Falling out of the water is normal.
Let the water after this filter can be used normally.

note

    Filter efficiency and service life depending on operating conditions Cleaning, including depending on the amount of water used and quality of filtered water
    1 jug holds about 1 liter of water.

How to use the filter lifetime count function

    Press and hold the START button for 6 seconds to activate the filter life counter. The screen will display the number “90” which means the day. The service life of the cartridge is 90 days, and the number will gradually decrease as the number of days specified until it reaches 0, indicating that the filter has reached the end of its service life. to replace the filter
    In case of replacing a new filter, press and hold the START button for 3 seconds to start counting again.

Tips for using a water filter jug

    for maximum efficiency Unfiltered water should be added to the side of the water tank. instead of pouring over the filter to allow the water to gradually filter effectively
    You should wash your hands before changing the filter every time.
    It should be used with normal temperature water.
    The body of the jug should be washed regularly. at least once a week
    The filter should be replaced after 2-3 months of use, or about 150 liters.
    The filtered water should be replaced for a long time and re-filtered every time.
    Both the pitcher and the filtered water should be kept in the refrigerator. to drink cool, refreshing water
    Suitable for use with tap water only.